High-Crrent-Power-supply-Copy

High Power DC Regulated Supply

The High Power DC Supplies are backed-up by company’s valuable technical experience in the field of Power Electronics.

 

The DC Rectifiers are designed both regulated and un-regulated type and can be used for Ground maintenance of aircrafts and other related equipments. It can also be used for testing and starting of armed vehicles or for other applications.

 

The DC regulated supplies manufactured by Statcon Energiaa are designed to give highly stable, well regulated, low ripple output capable of meeting continuous as well as short time ranking duty DC loads demands.

 

In addition the monitoring and alarm circuit ensures that the unit trips in case of any abnormal conditions which are necessary as per Govt. or MIL Standards for Defence equipments.

 

The technologies used for AC-DC are fully solid state including SCR controls as well as IGBT/MOSFET based SMPS technologies. The availability of wide range from 50A to 2000 Amps (higher on request*) is capable of meeting requirements of various uses across the whole spectrum of Defence Equipments. The DC regulated supplies are available in both free- standing models as well as trolley mounted options.

TECHNICAL SPECIFICATION

Input Voltage 415V ±10%, 50Hz / 60Hz, 3 Phase AC
Output Current 100A to 1500A (other ratings on request available)
Output Voltages 12V / 24V / 30V/ 48V / 110V / 220V (other voltages on request)
Operating Temperature -5ºto +55ºC
Voltage Regulation ± 1% for 10% to 100% load change
Output Ripple Up to 1% peak to peak or even lower as per the requirement
Overload 120% for 60 Seconds
150% for 10 Seconds
Transient Response As per MIL standard 704E
Type of output connector Bus bar type terminals or through 3 pin NATO with suitable cable
Type of enclosure Free standing or Trolley mounted
Note : Parameters given above are standard and can be changed without any prior intimation.